HydroFlo Tech, LLC.
Quality Assurance Program

Leak Test Certification

HFT Job #: Fabricator:

Approved GA Drawing: Current Fab Drawing:

As stated on our drawings and/or specifications, welds on interior compartments are to be hydrostatically tested to insure weld integrity between interior walls. If leaks are detected, another hydrostatic test is required after remediation. 

After completion of the interior hydrostatic test, the entire unit shall be subjected to a full level hydrostatic test for a minimum duration of 12 hrs. A representative from HydroFlo Tech MUST witness a successful hydrostatic leak test before approval will be given to proceed with coating. If leaks are detected, another hydrostatic test is required after remediation. 

Please provide inspector’s signature(s) as required on form(s).

Interior Hydrostatic test: Results___________________________________________________________

Inspector’s Name___________________________________________________

Signed_________________________________ Date________________

AND

Full Level Hydrostatic Test: Results___________________________________________________________

Inspector’s Name___________________________________________________

Signed_________________________________ Date________________

a