A "Green" Company Since 1990

HydroFloTech HydroCell Media Filters

HydroFlo Media Filters are specifically designed to polish the effluent of our upstream treatment equipment. Greater solids loading and/or finer particle removal can be achieved by using alternate media beds. Special media is selected, per application, to achieve the highest quality effluent, while sustaining low-pressure drop.

Polishing filters remove suspended solids and sediment from the waste stream. Raw water enters each cell, then passes through a selected media bed where suspended solids are filtered out. Filtered water leaves each cell and continues out through the filtered water valve. The filtration process is automatic, with raw water being fed to the system using a feed pump.

HydroCell™
High Rate Sand Filter

Model HCHR-18 handles up to
35 GPM of continuous flow
(based on application)

The HydroCell™ high rate sand filter is designed to remove organic and/or inorganic suspended solids down to 20 microns in diameter.

Standard features include high build epoxy linings, automatic valves, solid state controls and structural steel skids.

All filters come pre-assembled, factory tested. They are designed to be easy to install and simple to operate and maintain - everything you could want in an industrial duty package, built to take all the abuse you can throw at it and still keep doing its job day in and day out.

Captured solids are backwashed, one cell at a time, per operator input, differential pressure or a timed basis. Backwash is achieved by using the filtered raw water from two (2) of the filtered cells and diverting over to the remaining cell. All cells are backwashed in sequence. The filtration process will continue while in the backwash cycle. An independent backwash water supply is not required.

HydroCell™ High Rate Sand Filter

HydroFlo High Rate Automatic Backwashing Sand Media Filters are designed for general-purpose water filtration. These permanent media, automatic backwashing filters will remove organic and/or inorganic suspended solids down to 20 microns in size.

HydroCell™ Deep Bed Sand Filter

HydroFlo Deep Bed Automatic Backwashing Sand Filters are designed for stringent general purpose water filtration. These permanent media, automatic backwashing filters will remove organic and/or inorganic suspended solids down to 15 microns in size.

 

HydroCell™ Multi-Media Filter

HydroFlo Automatic Backwashing Multi-Media Filters are designed for enhanced water quality filtration. These permanent media, automatic backwashing filters will remove organic and/or inorganic suspended solids down to 5 microns and below in size, and will entrap greater amounts of suspended solids contaminants than sand media filters.